Pallet stacker

  • CL16 Three Mast G series

  • CL16 Three Mast G series

  • CL16 Three Mast G series

  • CL16 Three Mast G series

  • Configuration
  • Performance
  • Operation
  • Maintenance
  • The main mast is made by 12# U-steel, with the leg thickness of 21.3 mm, and the fixed support legs is made by 124*50 rectangular solid steel, which create the powerful triple mast stacker. The high strength of the truck body ensures the stability when operating.

  • The hydraulic power unit, power of 3.0 KW, ensures stable and reliable lifting and lowering when loaded. The speed can be adjusted by the operators.

  • The most advanced vertical AC drive system. The motor can get more energy and greater braking torque to make it more powerful and better in acceleration. It has many advantages such as high efficiency, small size, light weight, free maintenance, easy cooling and long service life.

  • Imported CURTIS AC controller and MOSFETS drive have functions of stepless speed regulating and reverse braking. Perfect temperature protection and compensation functions ensure the thermal protection and stable output.

  • High-performance storage batteries have a good cycle performance, strong ability to recover from deep discharging, and long service life.

  • Intelligent charger adopts international advanced high-frequency switching power supply circuit. Built-in CPU, with small size and light weight, precisely controls the charging process.

  • 标配急停开关,当车辆处于危险状态时,按下急停开关就能切断电源,车辆停止运转,保护操作者人身和设备的安全。

  • 控制手柄上安装紧急反向开关,当车辆后退失控时,操作者的肚皮主动或被动触及反向开关,车辆将立即停驶并迅速反向运动一小段距离,防止操作者的身体受到挤压伤害。

  • 驾驶位两侧标配保护臂,保护操作者安全。

  • 驱动系统中间设浮动支架,确保车辆运行的稳定性,转弯时车身平稳、不倾斜。

  • 车体后部加宽设计,大大增加了高位堆垛车的稳定性。

  • 标配高货位限速装置,当门架从底部上升一小段距离后,自动触碰模式开关,作业由搬运模式转化为堆垛模式,行驶速度自动降低,提高作业安全。

  • 标配起升电限位功能,当货叉升至顶部时,系统自动切断上行电源,平稳停车,有效防止“冒顶”事故的发生;同时也能减少能量浪费,延长液压系统及相关部件寿命。

  • 具备断电刹车功能,手柄松开或压到底部,车辆立即断电刹车,当车辆失控或在坡道上时,此功能尤为实用,更加安全、可靠。

  • CURTIS控制器具备过压、低压、过流、高温、短路等多种保护功能,其MOSFETS具有短路保护功能,防止飞车。

  • 高品双油缸设计,专为高位堆垛车配置,在提升车身稳定性的同时,提供了更好的视野,操控更到位。

  • 配置增压油缸,速度快、出力大、能耗低,防止重载时出现打滑现象。

  • 采用全自由提升配置,方便车辆在集装箱内或其他顶棚高度有限制的环境内作业。

  • 全系标配电子助力转向系统,助力反应非常敏锐,手柄操控舒适自如,大大降低了操作者的劳动强度。转向低速时轻、高速时稳,更加智能、操控更加精准,驾驶感受更加顺畅。

  • 当门架回落到接近底部位置时,自动触碰模式开关,作业由堆垛模式转化为搬运模式,行驶速度自动加快,提高作业效率。

  • 浮动式驱动轮,前双小轮与后双平衡轮布置,整车更加稳定,过障碍能力强,操作更加灵活。

  • 货叉支架左右两侧设调节螺栓,当长年使用或其他因素导致货叉整体不够水平时,可以通过调节螺栓将两支货叉整体调节到水平状态。

  • 控制器带自我诊断功能,手持单元与控制器联接后可显示故障代码,迅速精准排查故障。

  • 蓄电池箱盖可以直接揭开,方便对蓄电池进行检测、加液、更换。

  • 交流电动机所需元件数量少,没有需要定期更换的易损件,几乎不用维护,更高效,更坚固耐用。

CL16 Three Mast G seriesMain technical parameters

GoTop
Copyright 2015 jialift ALL rights reserved. Zhe ICP 15037749Reserved Power By:HanSun